Order Products : sales@su-jiao.com
Deprene 103-40
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | Shanghai Lin Gen Rubber Materials Co., Ltd. |
| Trademark: | Deprene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Y5hG14_Deprene10340.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Deprene 103-40 is a polypropylene EPDM rubber (PP EPDM) material,. This product is available in the Asia-Pacific region and is processed by extrusion or injection molding. The main features of Deprene 103-40 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D297 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 38 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 30 | % | ASTM D412 |
| Tensile Stress (100% Strain) | 11.0 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 22.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 560 | % | ASTM D412 |
| Tear Strength | 88.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 22 hr | 38 | % | ASTM D395 |
| 70°C, 22 hr | 50 | % | ASTM D395 |
| 120°C, 22 hr | 70 | % | ASTM D395 |
| Aging | Nominal Value | Unit | |
|---|---|---|---|
| Change in Tensile Strength (150°C, 168 hr) | -9.0 | % | |
| Change in Ultimate Elongation (150°C, 168 hr) | -20 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -50.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 - 90 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 190 - 250 | °C | |
| Injection Pressure | 40.0 - 60.0 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 170 - 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starpylen MFM43S | Eurostar Engineering Plastics | PP, Unspecified | Starpylen |
| Udel® GF-120 | Solvay Specialty Polymers | PSU | Udel® |
| Kingfa PA6-MG30 | Kingfa | Nylon 6 | Kingfa |
| Loyblend® YA-1004 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | ABS+PBT | Loyblend® |
| PENTAMID A GV50 H natur | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
