Sarlink® TPE EE-2280N NAT Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Sarlink EE-2280N NAT is a general purpose thermoplastic elastomer designed for automotive applications, including exterior extruded components. Sarlink EE-2280N NAT is a medium hardness, high density, filled, resilient grade that exhibits good processability.

General Information
Features	High density Workability, good Good flexibility Good coloring Good adhesion Good chemical resistance Fill Excellent appearance Elastic Medium hardness
Uses	Application in Automobile Field Automotive exterior parts Rubber substitution
RoHS Compliance	RoHS compliance
Appearance	Natural color
Forms	Particle
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Density	1.18	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 5 sec)	80		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	3.00	MPa	ISO 37
Tensile Strength (Break)	12.6	MPa	ISO 37
Tensile Elongation (Break)	720	%	ISO 37
Compression Set (70°C, 22 hr)	49	%	ISO 815

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 206 sec^-1)	310	Pa·s	ISO 11443

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	170 - 190	°C
Middle Temperature	175 - 195	°C
Front Temperature	180 - 200	°C
Nozzle Temperature	180 - 205	°C
Processing (Melt) Temp	185 - 210	°C
Mold Temperature	35 - 60	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 120	rpm
Cushion	3.81 - 25.4	mm

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	170 - 195	°C
Cylinder Zone 2 Temp.	180 - 200	°C
Cylinder Zone 3 Temp.	180 - 205	°C
Cylinder Zone 4 Temp.	180 - 205	°C
Cylinder Zone 5 Temp.	180 - 210	°C
Die Temperature	180 - 210	°C

Extrusion instructions
螺杆转速30 - 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Y4elfM_SarlinkTPEEE2280NNAT.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
MAZMID B 150	Mazzaferro Indústria e Comércio de Polímeros e Fibras Ltda.	Nylon 6	MAZMID B
POLYNIL® PR40 LHS	Nilit Plastics	Nylon 66	POLYNIL®
UNINAR® 740	Nytef Plastics, Ltd.	PVDF	UNINAR®
Durethan® BG 30 X FN01 000000	LANXESS Corporation	Nylon 6	Durethan®
Karina WHITE PVC COMPOUND E 854-10/144-ERYM	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina