Order Products : sales@su-jiao.com
SureSpec GS-140
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Y3alAC_SureSpec-GS-140.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GS-140 is a multipurpose low molecular weight certified prime grade resin specially developed for injection molding thin-wall applications that require easy mold filling and good overall properties. GS-140 offers superior flexural strength, outstanding clarity, exceptional high-flow processability, fast injection cycling, fast filling long flow paths of intricate mold geometry with minimal stresses in moldings. GS-140 complies with FDA regulation 21CFR 177.1640 and with most international regulations concerning the use of Polystyrene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 14 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 75 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2900 | MPa | ASTM D638 |
| Tensile Strength 1(Yield) | 42.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 3030 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 87.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 93.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starex VE-0858 | SAMSUNG SDI CO., LTD. | ABS | Starex |
| Trilene® HY3.8FY | Chandra Asri Petrochemical | PP Homopolymer | Trilene® |
| Yuyao PPO GFN2-780 | Yuyao Tenglong Plastics Co., Ltd. | PPE+PS | Yuyao PPO |
| CONAP® EN-5852 | Cytec Industries Inc. | PUR, Unspecified | CONAP® |
| POLYfill PP HJ752 | Polykemi AB | PP, Unspecified | POLYfill |
