Order Products : sales@su-jiao.com
Desmopan® DP 9095AU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmopan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Y0Ikf3_Desmopan-DP-9095AU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| injection molding grade; with special UV stabilizers; very good hydrolysis and microbial resistance; good wear resistance; low warparge; short cycle times; Application; Ear-tags |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1150 | kg/m³ | ISO 1183 1 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 2 | ||
| Shore A, 3 sec | 94 | ||
| Shore D, 15 sec | 45 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| Break, 23°C 3 | 52.7 | MPa | DIN 53504 |
| 10% Strain, 23°C 4 | 6.40 | MPa | DIN 53504 |
| 50% Strain, 23°C | 12.0 | MPa | ISO 527-2/200 |
| 100% Strain, 23°C 5 | 14.8 | MPa | DIN 53504 |
| 300% Strain, 23°C 6 | 30.0 | MPa | DIN 53504 |
| Tensile Strain 7(Break, 23°C) | 450 | % | DIN 53504 |
| Abrasion Resistance (23°C) | 18.0 | mm³ | ISO 4649-A |
| Tensile Storage Modulus | ISO 6721-1,-4 | ||
| -20°C | 790 | MPa | |
| 20°C | 161 | MPa | |
| 60°C | 82.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience (23°C) | 33 | % | ISO 4662 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 8(23°C) | 130 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 30 | % | |
| 70°C, 24 hr | 47 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | < 100 | °C | |
| Processing (Melt) Temp | 200 to 220 | °C | |
| Mold Temperature | 20.0 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | 200 mm/min |
| 4 . | 200 mm/min |
| 5 . | 200 mm/min |
| 6 . | 200 mm/min |
| 7 . | 200 mm/min |
| 8 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® Vestolen A 5061 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® Vestolen A |
| TECASON™ P XRO | Ensinger Inc. | PPSU | TECASON™ |
| Daelim Po1y® PP-164 | DAELIM INDUSTRIAL CO., LTD. | PP Homopolymer | Daelim Po1y® |
| EPLAMID 66 IMP NC C001 | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 66 | EPLAMID 66 |
| KumhoSunny ABS HAG7230 | Shanghai KumhoSunny Plastics Co., Ltd. | ABS | KumhoSunny ABS |
