Order Products : sales@su-jiao.com
LTM® 26 series
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | LTM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XzPo6q_LTM-26-series.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LTM 26 series prepregs are low to medium viscosity epoxy resin matrices formulated to cure at low initial cure temperatures. These prepregs can be used to manufacture components by autoclave, press or vacuum bag moulding techniques. After post-cure, these resins are suitable for service temperatures up to 115°C (239°F) dry or 90°C (194°F) wet. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity 1 | 1.18 | g/cm³ |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature | |||
| -- 2 | 75.0 | °C | |
| -- 3 | 130 | °C |
| Note Message | |
|---|---|
| 1 . | Cured resin |
| 2 . | TMA, 5 hours at 60°C (140°F) |
| 3 . | TMA, 5 hours at 60°C (140°F) + 1 hour at 120°C (248°F) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVASTER® B1 HML GF 10 | Plastcom | PBT | SLOVASTER® |
| Terblend® N NM-21EF | INEOS Styrolution Group GmbH | ABS+Nylon | Terblend® N |
| Grilon® TS FR | EMS-GRIVORY | Nylon 66/6 | Grilon® |
| Hostalen ACP 5231 D | LyondellBasell Industries | HDPE | Hostalen |
| Magnobond 108 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
