Order Products : sales@su-jiao.com
INEOS PP N05G-00
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XwkdvW_INEOS-PP-N05G-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| N05G-00 is a general purpose, polypropylene impact copolymer designed for injection molding and compounding applications. The grade benefits from a superior balance of stiffness and impact strength as compared to competitive impact copolymers of similar melt flow rate. This material has been recognized by UL for sustained use at 65°C and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.902 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 79 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 23.9 | MPa | |
| Break | 14.1 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 6.6 | % | |
| Break | 280 | % | |
| Flexural Modulus - 1% Secant | 1230 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-20°C) | 80 | J/m | ASTM D256 |
| Notched Izod Impact (Area) | ASTM D256 | ||
| -20°C | 7.80 | kJ/m² | |
| 23°C | No Break | ||
| Instrumented Impact, Ductility | ASTM D3763 | ||
| -20°C | Ductile | ||
| 23°C | Ductile |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 95.0 | °C | |
| 1.8 MPa, Unannealed | 48.9 | °C | |
| Vicat Softening Temperature | 149 | °C | ASTM D1525 |
| RTI Elec (1.50 mm) | 65.0 | °C | UL 746 |
| RTI Imp (1.50 mm) | 65.0 | °C | UL 746 |
| RTI Str (1.50 mm) | 65.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gloss (60°) | 60 | ASTM D2457 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBE Nylon 5034 UC2 | UBE Engineering Plastics, S.A. | Nylon 66/6 | UBE Nylon |
| Ad-Tech Epoxy ESR-217-AL | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Daelim Po1y® PP-137T | DAELIM INDUSTRIAL CO., LTD. | PP, Unspecified | Daelim Po1y® |
| Galloo GP-PP-88 | Galloo Plastics | PP, Unspecified | Galloo |
| Jiangsu Sinarise JM9113 | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
