Order Products : sales@su-jiao.com
Silamid® LS
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Roonamid a.s. |
| Trademark: | Silamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Xsgnfo_Silamid-LS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyamide 6, modificated, increased impact toughness maintained even at low temperature and dry conditions, optimal processing properties, natural, other color shades according to customer's request. Suitable as a construction material where an increased impact strength is required. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.0 | g/10 min | ISO 1133 |
| Molding Shrinkage | |||
| Across Flow | 1.7 | % | |
| Flow | 1.6 | % | |
| Water Absorption (23°C, 24 hr) | 1.5 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1600 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Yield | 45.0 | MPa | |
| Break | 35.0 | MPa | |
| Flexural Modulus | 1400 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -40°C | 15 | kJ/m² | |
| 23°C | 50 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -40°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 100 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 40.0 | °C | ISO 75-2/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | < 80.0 | °C | |
| Suggested Max Moisture | 0.10 | % | |
| Processing (Melt) Temp | 230 to 250 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marlex® M368 | Chevron Phillips Chemical Company LLC | MDPE | Marlex® |
| McCann PP M10GHPPCC | McCann Plastics Inc. | PP Homopolymer | McCann PP |
| TEDUR® L 9560 S | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| ACCUTECH™ CP0437C40L | ACLO Compounders Inc. | PP Copolymer | ACCUTECH™ |
| Optix® CA-927 | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
