Order Products : sales@su-jiao.com
Geon™ FIT E 52
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Mexichem Specialty Resins, Inc. |
| Trademark: | Geon™ FIT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XsOSrK_Geon-FIT-E-52.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon® FIT E 52 is a high molecular weight homopolymer resin intended for use as a Formulation Improvement Tool (FIT) in plastisol formulations which enhance the plastisol usage (pot life) and reduce the viscosity aging characteristics. This resin increases the physical properties of end application up to 30% compared to traditional blending resins. It allows the addition of up to 40phr of filler, significantly decreasing formulation costs. It improves air release properties, provides faster de -aeration time ,and reduces scrap rates caused by the presence of air bubbles or voids in finished part. This resin reduces the viscosity profile of the plastisol providing an improved 'ease of coating' performance resulting a more uniform plastisol coating and improving line up time. Geon® FIT E 52 is recommeded for high strength solid and foamed plastisol applications for instance coated fabrics, cast films and coatings, rotationally and slush molded parts, and dip molded and coated parts |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| K-Value 1 | 72.0 | Internal method | |
| Apparent loose density 2 | 0.530 | g/cm³ | Internal method |
| Intrinsic Viscosity 3 | 1.1 | ASTM D1243-60-A | |
| Particle Size | Internal method | ||
| < 52 micron 4 | 95.0 | % | Internal method |
| < 74 micron 5 | 99.0 | % | Internal method |
| Mean Volume 6 | 30.0 | µm | Internal method |
| Relative Viscosity 7 | 2.54 | Internal method |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze - Fused 5 mins @ 350F 8 | 51 | % | Internal method |
| Gloss- 60 Degree, Fused 5 mins @ 350F 9 | 15 | % | Internal method |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brokfield Viscosity | Internal method | ||
| Initial Viscosity @ 2 rpm 10 | 2.10 | Pa·s | Internal method |
| Initial Viscosity @ 20 rpm 11 | 2.08 | Pa·s | Internal method |
| One Day Viscosity @ 2 rpm 12 | 2.40 | Pa·s | Internal method |
| One Day Viscosity @ 20 rpm 13 | 2.55 | Pa·s | Internal method |
| Cut off the outflow- 95 psi 14 | 510.00 | g/10 min | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Residual Vinyl Chloride Monomer 15 | ppm | Internal method | |
| Volatiles 16 | 0.070 | % | Internal method |
| polymerization process | Suspension | ||
| Gel temperature 17 | 99 | °C | Internal method |
| Vinyl diffuser 18 | 95.0 | µm | Internal method |
| Note:The value set forth represent "typical" values and Mexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, net weight 50 lbs, 2500 lbs per pallet. Information shown on the package includes commercial identification number, lot and weight.Geon® ALTC (formulation): 60phr Geon® 121A, 40phr Geon® FIT E 52, 57phr DINP, 3phr ESO, and 2phr Therm-Chek SP 120 LOHFGeon® STP 1203(formulation): 60phr Geon® 178, 40phr Geon® FIT E 52,and 60phr DOP |
| Note Message | |
|---|---|
| 1 . | Molten flow equivalent value |
| 2 . | Geon® STP 1169 |
| 3 . | Molten flow equivalent value |
| 4 . | Geon® DFT 1466 |
| 5 . | Geon® DFT 1466 |
| 6 . | Geon® 812 |
| 7 . | Molten flow equivalent value |
| 8 . | Geon® ALTC 66 (with provided formulation) |
| 9 . | Geon® ALTC 65 (with provided formulation) |
| 10 . | Geon® 1169 |
| 11 . | Geon® ALTC 22 (with provided formulation) |
| 12 . | Geon® ALTC 22 (with provided formulation) |
| 13 . | Geon® ALTC 22 (with provided formulation) |
| 14 . | Geon® ALTC 23(with provided formulation) |
| 15 . | Geon® STP 1005 |
| 16 . | Bags, Geon®793 |
| 17 . | Geon® ALTC 29 (with provided formulation) |
| 18 . | Geon® STP 1203 (with provided formulation) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PONACOM PS 5360 | Ponachem Compound GmbH | PS (HIPS) | PONACOM PS |
| NILENE® E K30T | Taro Plast S.p.A. | PP Copolymer | NILENE® |
| AMTOPP BFP30 | Inteplast Group | PP, Unspecified | AMTOPP |
| LUBEMID B27 GF30 FR V0 NATURAL | LUBEN PLAST srl | Nylon 6 | LUBEMID |
| POCAN® DP 1105 000000 | LANXESS GmbH | PBT | POCAN® |
