Order Products : sales@su-jiao.com
CERTENE™ PHT-3
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XrArkl_CERTENE-PHT-3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PHT-3 is a certified prime grade Polypropylene specially designed for extrusion of Water-Quench Cast Film for Slit Tape applications. PHT-3 combines excellent processability, very good thermal stability, and high degree of purity with Low Water Carry-over and good balance of tape strength and orientation properties. PHT-3 applications include stretched tapes for textile Raffia uses, such as woven industrial sacks, carpet backing, tarpaulins and geotextiles. Fibrillated tapes for twines and ropes, and monofilaments for bristles and cordage, are other applications of PHT-3. Recommended processing temperatures of PHT-3 are: 1) tape-210° to 220°C in barrel and 230-250°C in head, and 2) multifilament-210° to 230°C. PHT-3 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.904 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus - 1% Secant 1(Injection Molded) | 1410 | MPa | ASTM D790 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1.Ultimate Elongation Annealed, ASTM D2256-A, 100 mils: <40 %Draw Ratio Annealed, 100 mils: 6:1Shrinkage @ 100°C Annealed, ASTM D2259, 100 mils, boiling water: 1 %All tests were conducted according to ASTM D2146. Test specimen injection molded, Type 1.Tenacity @ Break Annealed, ASTM D2256-A, 100 mils: 6 gr/den |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 210 - 230 | °C |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adell Polyamide BT-13 General Purpose | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| HONES® PBT GF30E | Guangdong Shunde Hones Polymer Material Co., Ltd. | PBT | HONES® |
| Infino AE-2030 | SAMSUNG SDI CO., LTD. | PC+PET | Infino |
| Laprene® 830000823 | SO.F.TER. SPA | SEBS | Laprene® |
| OTECH TPO OTR5088-Molding | OTECH Corporation | TPE | OTECH TPO |
