Order Products : sales@su-jiao.com
NORYL GTX™ GTX626 resin
| Category: | PPE+PS+Nylon , Polyphenylene Ether + PS + Nylon |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | NORYL GTX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XpWbgG_NORYL-GTX-GTX626-resin.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Blowmolding and extrusion. High heat and chemical resistant. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.3 - 1.4 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 62.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 83 | % | ASTM D638 |
| Flexural Modulus 3(100 mm Span) | 2280 | MPa | ASTM D790 |
| Flexural Strength 4(Yield, 100 mm Span) | 95.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C | 120 | J/m | ASTM D256 |
| 23°C | 340 | J/m | ASTM D256 |
| Instrumented Dart Impact | ASTM D3763 | ||
| -30°C, Energy at Peak Load | 36.6 | J | ASTM D3763 |
| 23°C, Energy at Peak Load | 31.2 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 6.40 mm) | 179 | °C | ASTM D648 |
| RTI Elec | 50.0 | °C | UL 746 |
| RTI Imp | 50.0 | °C | UL 746 |
| RTI | 50.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 4.0 | hr | |
| Cylinder Zone 1 Temp. | 271 - 282 | °C | |
| Cylinder Zone 2 Temp. | 271 - 282 | °C | |
| Cylinder Zone 3 Temp. | 271 - 282 | °C | |
| Cylinder Zone 4 Temp. | 271 - 282 | °C | |
| Cylinder Zone 5 Temp. | 277 - 288 | °C | |
| Adapter Temperature | 277 - 288 | °C | |
| Die Temperature | 277 - 288 | °C |
| Extrusion instructions |
|---|
| Drying Time (Cumulative): 16 hrsHead - Zone 6 - Top Temperature: 277 - 288 °CHead - Zone 7 - Bottom Temperature: 277 - 288 °CMelt Temperature (Parison): 277 - 288 °CMold Temperature: 79 °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 50mm/min |
| 2 . | Type 1, 50mm/min |
| 3 . | 2.6 mm/min |
| 4 . | 2.6 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mowiflex™ FXT 283 | Kuraray Co., Ltd. | PVOH | Mowiflex™ |
| Nycal™ 1820T1 Bk-1 | Technical Polymers, LLC | Nylon 6 | Nycal™ |
| Braskem PP H734-52RNA | Braskem Europe GmbH | PP Homopolymer | Braskem PP |
| ESTOPLAST EP 5230NN01 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
| LEXAN™ OQ4120R resin | SABIC Innovative Plastics | PC | LEXAN™ |
