Order Products : sales@su-jiao.com
Thermoset Plastics EP-22
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Xp37gk_Thermoset-Plastics-EP-22.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics EP-22 is an Epoxy; Epoxide (Epoxy) material. It is available in North America for casting or encapsulating. Important attributes of Thermoset Plastics EP-22 are:
Typical application of Thermoset Plastics EP-22: Wire & Cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.85 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 15.9 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 55 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 130 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 4.20 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.021 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 1.0 | ||
| Resin | Mix Ratio by Weight: 1.0 | ||
| Thermoset Mix Viscosity (25°C) | 3000 | cP | ASTM D2393 |
| Demold Time (25°C) | 1400 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom SC1-5000 | Spartech Polycom | ABS | Spartech |
| VITAMIDE® BY15 | A. Schulman Europe | Nylon 6 | VITAMIDE® |
| TPSiV™ 4100-70A | Multibase, A Dow Corning Company | TPSiV | TPSiV™ |
| TOTAL Polyethylene MDPE 3802 (Blow Molding) | TOTAL Refining & Chemicals | MDPE | TOTAL Polyethylene |
| ESTOPLAST XU 6100RD02 | Ester Industries Ltd. | Nylon 66 | ESTOPLAST XU |
