Order Products : sales@su-jiao.com
POLIGOM 04/AF 2
| Category: | EPDM , Ethylene Propylene Diene Terpolymer |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | POLIGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XoQnHN_POLIGOM-04-AF-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLIGOM : is our flexible thermoplastic compound flame retardant PVC free and heavy-metal free. POLIGOM 04/AF 2 : it is studied to produce a general purpose flexible sheathing without migration risks (plasticizers-free). Suitable to pass 30,000 cycles. Certify : TI6,TM7,VDE 0207 HM4(K=0,7),AS/NZS 3808:2000 HFI 75-90 TP,HFS 75-90-110 TP |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 9.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 92 | ASTM D2240 | |
| Shaw D | 36 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 10.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | > 140 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (110°C, 168 hr) | < 20 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (110°C, 168 hr) | < 20 | % | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test - Residual 1(90°C) | % | IEC 60811 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 180 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (50 Hz) | 4.30 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | > 31 | % | ASTM D2863 |
| Additional Information |
|---|
| No detrimental effects on properties and capability of POLIGOM in presence of convenient Masterbatch colours, black included. We suggest to dry masterbatch before using. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 155 | °C | |
| Cylinder Zone 3 Temp. | 170 | °C | |
| Cylinder Zone 4 Temp. | 175 | °C | |
| Die Temperature | 185 | °C |
| Note Message | |
|---|---|
| 1 . | K=0.7, 4 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UNIPA® MRg | Nytef Plastics, Ltd. | Nylon 6 | UNIPA® |
| Bergamid™ B70 G45 BK | PolyOne Corporation | Nylon 6 | Bergamid™ |
| Exxtral™ Performance Polyolefin CNU012 | ExxonMobil Chemical | TPO | Exxtral™ Performance Polyolefin |
| Hapweld™ 602 | Hapco Inc. | TP, Unspecified | Hapweld™ |
| MAJ'ECO GN080BS | AD majoris | Biodeg Polymers | MAJ'ECO |
