Order Products : sales@su-jiao.com
Kemcor LD 9157
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XnvyYc_Kemcor-LD-9157.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 60 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.0 to 3.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 43 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 140 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 8.00 | MPa | |
| Break | 10.0 | MPa | |
| Tensile Elongation (Break) | 100 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 150 to 170 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILVER® PP 423G30 | Guangdong Silver Age Sci & Tech. Co., Ltd | PP, Unspecified | SILVER® |
| NuSil MED16-6606 | NuSil Technology | Silicone | NuSil |
| CGPC PVC R-11X MI Injection | China General Plastics Corporation | PVC, Flexible | CGPC PVC |
| DOWLEX™ IP 10 | The Dow Chemical Company | HDPE | DOWLEX™ |
| OTECH PVC OW840-UL Approved | OTECH Corporation | PVC, Unspecified | OTECH PVC |
