Order Products : sales@su-jiao.com
Sinelec CCB6975
| Category: | PS (Specialty) , Specialty Polystyrene |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinelec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XmeaPi_Sinelec-CCB6975.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sinelec CCB6975 is a Specialty Polystyrene material. It is available in Asia Pacific for sheet extrusion. Important attributes of Sinelec CCB6975 are:
Typical application of Sinelec CCB6975: Sheet |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/10.0 kg) | 2.0 to 8.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 27.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 40 | % | ASTM D638 |
| Flexural Modulus | 2000 | MPa | ASTM D790 |
| Flexural Strength | 40.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 35 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | < 1.0E+5 | ohms | ASTM D257 |
| Volume Resistivity | < 1.0E+5 | ohms·cm | ASTM D257 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Cylinder Zone 1 Temp. | 190 | °C | |
| Cylinder Zone 2 Temp. | 200 | °C | |
| Cylinder Zone 3 Temp. | 210 | °C | |
| Cylinder Zone 4 Temp. | 220 | °C | |
| Cylinder Zone 5 Temp. | 220 | °C | |
| Die Temperature | 220 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PC 59 GB 10 | Plastcom | PP, Unspecified | SLOVALEN® |
| Novodur® 240 | Styrolution | ABS | Novodur® |
| 3M™ Dyneon™ PTFE Compound TF 3712 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
| ALCOM® PA66 910/1 GF15 MR25 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| PLUSTEK RA115 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
