Order Products : sales@su-jiao.com

PRIMALENE WPP703

Category:	HDPE , High Density Polyethylene
Manufacturer:	Southern Polymer, Inc.
Trademark:	PRIMALENE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	XlOQPP_PRIMALENE-WPP703.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

A blow molding grade high density polyethylene

Applications:

Food packaging

Liquid food containers (Milk, water and juices)

Thermoformed parts

Thin gauge sheet

Features:

High stiffness

Medium molecular weight distribution

FDA approved

General Information
Features	Food Contact Acceptable High Density High Stiffness Med.-Wide Molecular Weight Distrib.
Uses	Beverage Containers Containers Food Packaging Food Service Applications Non-specific Food Applications Thermoforming Applications
Agency Ratings	FDA Food Contact, Unspecified Rating
Processing Method	Blow Molding

Physical	Nominal Value	Unit	Test Method
Density	0.963	g/cm³	ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.25	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal)	15.0	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	31.0	MPa	ASTM D638
Tensile Elongation (Break)	450	%	ASTM D638
Flexural Modulus - Tangent	1620	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Tensile Impact Strength	147	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -76.1	°C	ASTM D746
Vicat Softening Temperature	127	°C	ASTM D1525

Resin Grade	Manufacturer	Category	Trademark
Styrolution PS ESCRimo	INEOS Styrolution Group GmbH	PS (HIPS)	Styrolution PS
Zenite® ZE55201	Celanese Corporation	LCP	Zenite®
LNP™ STAT-KON™ ZE0039 compound	SABIC Innovative Plastics	PPE+PS	LNP™ STAT-KON™
PARAPET HR-S	Kuraray Co., Ltd.	Acrylic (PMMA)	PARAPET
DAI-EL™ G-912	DAIKIN AMERICA, INC.	Fluorelastomer	DAI-EL™