VECTOR® 2518A

Category: SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer: Dexco Polymers LP
Trademark: VECTOR®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: XhW74H_VECTOR-2518A.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
VECTOR 2518A
Styrene-Butadiene-Styrene (SBS) Block Copolymer
  • SBS(1) triblock copolymer.
  • Contains <1% diblock copolymer.
  • Medium styrene, high modulus copolymer.
  • Outstanding thermal stability.
  • Supplied as a porous pellet, dusted with talc.
  • VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information.

VECTOR 2518A styrene-butadiene-styrene block copolymer is produced via proprietary sequential anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. VECTOR 2518A is not formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite).

It is more creep resistant than VECTOR 8508A SBS. It has excellent thermoplastic elastomer properties and outstanding physical strength. It is designed for use as an impact/toughness modifier in blends with styrenics and in elastomeric film compounds.
General Information
Features
  • Copolymer
  • Food Contact Acceptable
  • Good Creep Resistance
  • Good Strength
  • Good Thermal Stability
  • Porous
Uses
  • Plastics Modification
Forms
  • Pellets
PhysicalNominal ValueUnitTest Method
Specific Gravity 0.938g/cm³ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)0.60g/10 minASTM D1238
Solution Viscosity 1200mPa·sASTM D2196
Ash Content 0.7wt%ASTM D1416
Styrene Content 31.0wt%Internal Method
ElastomersNominal ValueUnitTest Method
Stress Relaxation 1
    Peak Force @ 200% strain (A) : 23°C, 889.0 µm 2.21MPa
    Peak Force @ 500% strain : 23°C, 889.0 µm 7.17MPa
    Ratio (A:B) : 23°C, 889.0 µm 2.20
    Relaxation @ 200% strain : 23°C, 889.0 µm 5.7%
    Set after 500% strain : 23°C, 889.0 µm 16%
    Unload @ 50% strain (B) : 23°C, 889.0 µm 1.03MPa
Additional InformationNominal ValueUnitTest Method
Diblock Content < 1.0wt%Internal Method
Volatiles 0.3wt%Internal Method
HardnessNominal ValueUnitTest Method
Durometer Hardness (Shore A, 1 sec)78ASTM D2240
ElastomersNominal ValueUnitTest Method
Tensile Stress 2(300% Strain, 25°C)4.14MPaASTM D412
Tensile Strength 3(Yield, 25°C)30.3MPaASTM D412
Tensile Elongation 4(Break, 25°C)1000%ASTM D412
Note Message
1 .Described in US 7,445,831 patent. Tested on roll milled/compression molded plaques (0.035" thick). Tested in the transverse direction at room temperature.
2 .25 Wt.% in toluene
3 .25 Wt.% in toluene
4 .25 Wt.% in toluene
Resin Grade Manufacturer Category Trademark
NORYL™ IGN320 resin SABIC Innovative Plastics PPE+PS NORYL™
Cevian®-V T550, T550SF Daicel Polymer Ltd. ABS Cevian®-V
Ebalta AH 110 / TGL Ebalta Kunststoff GmbH Epoxy Ebalta
Karina BLUE PVC COMPOUND -E 602D06/719-A-AT-IS Karina Ind. e Com. de Plásticos Ltda PVC, Unspecified Karina
Fortron® 1115E7 Celanese Corporation PPS Fortron®