Order Products : sales@su-jiao.com
EPIGUM EXP/53
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | EPIGUM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XgdhHA_EPIGUM-EXP-53.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EPIGUM EXP/53 is a halogen free thermoplastic material. EPIGUM EXP/53 is a high performance thermoplastic material, thermally stable until 150°C, with continuous temperature rating 105°C. Suitable to use on medium voltage cable insulation. Readily recycled both in process and post consumer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 16.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | > 600 | % | IEC 60811 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-20°C) | > 800 | J/m | ASTM D256 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (135°C, 168 hr) | < 25 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (135°C, 168 hr) | < 25 | % | IEC 60811 |
| Heat Aging - 6 hr (200°C) | Pass | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Bending Test (-40°C) | Pass | ||
| Hot Pressure Test - Penetration 1(125°C) | < 10 | % | IEC 60811 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+16 | ohms·cm | BS 6622 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 2 Temp. | 180 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Cylinder Zone 4 Temp. | 200 | °C | |
| Cylinder Zone 5 Temp. | 205 | °C | |
| Die Temperature | 210 | °C |
| Note Message | |
|---|---|
| 1 . | 6 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Felix Compounds Mica | Felix Compounds | PP+PE | Felix Compounds |
| KRATON® D1116 A | Kraton Polymers LLC | SBS | KRATON® |
| Hostacom RE701C | LyondellBasell Industries | PP Copolymer | Hostacom |
| PENTAMID AB L5 H1.2 schwarz | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
| POLYCOMPO PP V7200 | POLYCOMPO Co.,Ltd. | PP, Unspecified | POLYCOMPO PP |
