Order Products : sales@su-jiao.com
THERMOLAST® K TC7WEZ (Series: UV/HF)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | THERMOLAST® K |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Xe2HsT_THERMOLASTKTC7WEZSeriesUVHF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The UV/HF Series is your material solution for applications requiring high UV resistance and high flow ability. It is particularly appropriate for automotive exterior components. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183 |
| Spiral Flow | 95.0 | cm |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 72 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Break) | 8.00 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 600 | % | ISO 37 |
| Tear Strength 3 | 20 | kN/m | ISO 34-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60 - 80 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 180 | °C | |
| Middle Temperature | 200 | °C | |
| Front Temperature | 220 | °C | |
| Mold Temperature | 25 - 40 | °C | |
| Injection Pressure | 20.0 - 100 | MPa | |
| Back Pressure | 2.00 - 10.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| 3 . | Method B, right-angle specimen (cut) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYPRO® SB9310 | YUHWA Korea Petrochemical Ind. Co., Ltd. | PP Copolymer | POLYPRO® |
| NYCOA Polyamide 1637 | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA Polyamide |
| BJB Polyurethane WC-786 A/B | BJB Enterprises, Inc. | PUR, Unspecified | BJB Polyurethane |
| AMTOPP BA35 | Inteplast Group | PP, Unspecified | AMTOPP |
| PENTAMID B GV30 H LS black | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
