Order Products : sales@su-jiao.com
Moldex® QS254D/QCM240
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Mitsubishi Chemical Corporation |
| Trademark: | Moldex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XdlNGO_Moldex-QS254D-QCM240.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moldex® QS254D/QCM240 is a Polyolefin material. It is available in Asia Pacific. Primary attribute of Moldex® QS254D/QCM240: Crosslinkable. Typical application of Moldex® QS254D/QCM240: Plumbing/Piping/Potable Water |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.942 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (120°C/5.0 kg) | 0.30 | g/10 min | ISO 1133 |
| Gel Content 1(120°C) | 71 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 58 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, 23°C | 19.7 | MPa | |
| Yield, 95°C | 8.90 | MPa | |
| Break, 23°C | 25.5 | MPa | |
| Break, 95°C | 14.0 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Break, 23°C | 450 | % | |
| Break, 95°C | 650 | % |
| Note Message | |
|---|---|
| 1 . | In Xylene, 20 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRE-ELEC® ESD 7120 | Premix Oy | ABS | PRE-ELEC® |
| Adell Polyamide BY-10 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| Axiall PVC 6704 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| KEBATER® PBT BF230 | BARLOG plastics GmbH | PBT | KEBATER® |
| Sylvin 9604-80 Clear 8478 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
