Order Products : sales@su-jiao.com
INNATE™ ST50 Precision Packaging Resin
| Category: | PE, Unspecified , Precision Packaging Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | INNATE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Xc2hIl_INNATEST50PrecisionPackagingResin.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
INNATE™ ST50 Precision Packaging Resin is designed for exceptional abuse performance. It offers a unique combination of high stiffness with excellent toughness which enables excellent performance on automated packaging equipment. This product also delivers robust processability. Complies with:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.85 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| secant modulus | ASTM D882 | ||
| 2% secant, MD | 205 | MPa | ASTM D882 |
| 2% secant, TD | 228 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 12.4 | MPa | ASTM D882 |
| TD : Yield | 11.0 | MPa | ASTM D882 |
| MD : Fracture | 35.5 | MPa | ASTM D882 |
| TD : Fracture | 28.5 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 430 | % | ASTM D882 |
| TD : Fracture | 550 | % | ASTM D882 |
| Dart Drop Impact 1 | ASTM D1709 | ||
| Blow film 2 | 1500 | g | ASTM D1709 |
| Blow film 3 | 1200 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 270 | g | ASTM D1922 |
| TD | 530 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 47 | ASTM D2457 | |
| Haze | 14 | % | ASTM D1003 |
| Additional Information |
|---|
| Fabrication Conditions for 1 mil monolayer blown film at 100%: - Die Diameter: 8 in. Screw Type: DSB II Die Gap: 90 mil Melt Temperature: 428 °F Output: 10.4 lb/hr/in. of die circumference Screw Size: 3.5 in. Blow-Up Ratio: 2.5 to 1 Screw Speed: 40 rpm Frost Line Height:40 in. |
| Note Message | |
|---|---|
| 1 . | Method A |
| 2 . | Dart impact for 100% Pure |
| 3 . | Dart impact for blend with 10% LDPE (0.18 MI), 70 mil die gap |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 121-60M200 | ExxonMobil Chemical | TPV | Santoprene™ |
| Wellamid® MR340 42H-NBK1 | Wellman Engineering Resins | Nylon 6 | Wellamid® |
| Hifax CA387PC | LyondellBasell Industries | TPO (POE) | Hifax |
| Epocast 167 A/B | Huntsman Advanced Materials | Epoxy | Epocast |
| ISOTHANE® 2090A | Great Eastern Resins Industrial Co Ltd (GRECO) | TPU-Polyester | ISOTHANE® |
