Order Products : sales@su-jiao.com

Arak HDPE I4

Category:	HDPE , High Density Polyethylene
Manufacturer:	Shazand (Arak) Petrochemical Corporation
Trademark:	Arak HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	XakksS_Arak-HDPE-I4.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

I4 is a high density polyethylene grade, suitable for injection moulding applications.
Characteristics:

Low distortion tendency.

High toughness.

Good ESCR.

Typical applications are:

Thick-Walled, highly stressed transport containers e.g. refuse bins & fishcrates.

Screw caps.

Cable clips.

* I4 is suitable for food contact.

General Information
Features	Food Contact Acceptable Good Dimensional Stability Good Toughness High ESCR (Stress Crack Resist.)
Uses	Caps Closures Containers
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.954	g/cm³	DIN 53479
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	11	g/10 min	DIN 53735

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength	> 4.5	kJ/m²	DIN 53453

Optical	Nominal Value	Unit	Test Method
Yellowness Index	< 4.0	YI	DIN 6167

Resin Grade	Manufacturer	Category	Trademark
Rilsan® BMF	Arkema	Nylon 11	Rilsan®
AKROMID® B3 GF 20 natural (2470)	AKRO-PLASTIC GmbH	Nylon 6	AKROMID®
Borealis PE HE2598-C2	Borealis AG	HDPE, HMW	Borealis PE
Evoprene™ G 975	AlphaGary	SEBS	Evoprene™ G
Sylvin 9466-50D Natural	Sylvin Technologies Incorporated	PVC+PUR	Sylvin