Order Products : sales@su-jiao.com
VESTOSINT® 1111 natural color
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Evonik Industries AG |
| Trademark: | VESTOSINT® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XZzww7_VESTOSINT-1111-natural-color.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
VESTOSINT 1111 natural color is an unpigmented polyamide 12 powder. Among others it is used for transparent fluidized bed coating, manufacturing of magnetic cores and thermoplastic composites. We also deliver VESTOSINT 1111 in a broad range of different colors. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.02 | g/cm³ | ISO 1183 |
| Apparent Density | > 0.44 | g/cm³ | ISO 60 |
| Water Absorption | ISO 62 | ||
| Saturation, 100°C 1 | 1.9 | % | |
| Saturation, 23°C 2 | 1.3 | % | |
| Equilibrium, 23°C, 50% RH | 0.50 | % | |
| Particle Size Distribution | ISO 4610 | ||
| < 32.0 µm | < 2.0 | wt% | |
| < 100.0 µm | > 45.0 | wt% | |
| < 250.0 µm | 100.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 75 | ISO 868 | |
| Ball Indentation Hardness 3 | 90.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 43.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | ||
| Yield | 6.0 | % | |
| Break | > 100 | % | |
| Taber Abrasion Resistance (100 Cycles, 500 g, CS-17 Wheel) | < 1.00 | mg | ASTM D1242 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 176 | °C | ISO 3146 |
| CLTE - Flow (23 to 55°C) | 1.1E-4 | cm/cm/°C | ISO 11359-2 |
| Specific Heat | 2350 | J/kg/°C | DIN 53765 |
| Thermal Conductivity | 0.23 to 0.29 | W/m/K | DIN 52612 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | IEC 60093 |
| Electric Strength 4 | 90 | kV/mm | IEC 60243-1 |
| Note Message | |
|---|---|
| 1 . | Immersion |
| 2 . | 96%RH |
| 3 . | H30 |
| 4 . | K20/P50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMAPET® H1 | Indorama Ventures PCL | PET | RAMAPET® |
| T-Blend® 0892N-NE | TSRC Corporation | SEBS | T-Blend® |
| Plaslube® PA6 TS18 | Techmer Engineered Solutions | Nylon 6 | Plaslube® |
| SD POLYCA™ CS5015 | Sumika Styron Polycarbonate Limited | PC | SD POLYCA™ |
| Sylvin 8495-65 Grey 9618 | Sylvin Technologies Incorporated | PVC+NBR | Sylvin |
