Order Products : sales@su-jiao.com
LAMINEX® 2010
| Category: | PF , Phenol Formaldehyde Resin |
| Manufacturer: | Schwartz Technical Plastic |
| Trademark: | LAMINEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XY0TAE_LAMINEX-2010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Finely woven cotton fabric, phenolic resin impregnated Applications:
|
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.35 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness | 170 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7000 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Yield | 80.0 | MPa | ISO 527-2 |
| Fracture | 100 - 130 | MPa | ISO 527-2 |
| Compressive Stress | 170 | MPa | ISO 604 |
| Coefficient of Friction | ASTM D1894 | ||
| With steel-static 1 | 0.020 | ASTM D1894 | |
| With steel-static 2 | 0.020 | ASTM D1894 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 15 | kJ/m² | ISO 180 |
| Unnotched Izod Impact Strength | 30 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 3.0E-5 | cm/cm/°C | ISO 11359-2 |
| Thermal Conductivity | 0.29 | W/m/K | ISO 8302 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+8 | ohms | IEC 60093 |
| Dielectric Constant | 5.00 | IEC 60250 | |
| Dissipation Factor | 0.30 | IEC 60250 |
| Additional Information |
|---|
| Creepage/leakage Resistance: KA1Safe Temperature Range, short periods: 150°CSafe Temperature Range, permanent: 120°CMoisture Absorption under normal air condition: 100 mg |
| Note Message | |
|---|---|
| 1 . | without lubrication |
| 2 . | with lubrication |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stanyl® TE200F6 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Wellamid® XT1627-GY1 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| Acculam™ Phenolfab G3 | Accurate Plastics, Inc. | Phenolic | Acculam™ |
| Andur RT 9002 AP/Curene® 107 | Anderson Development Company | PUR-TDI | Andur |
| Fainplast PVC RK 335/1 | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
