Order Products : sales@su-jiao.com
Daplen™ EE260AE
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Borealis AG |
| Trademark: | Daplen™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XX8idi_Daplen-EE260AE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Daplen EE260AE is a 20% mineral filled elastomer modified polypropylene compound intended for injection moulding. This material has an excellent balance between impact strength and stiffness, gives a good surface quality and is easy to process. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 | g/10 min | ISO 1133 |
| Molding Shrinkage (23°C) | 0.90 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness (H 132/10) | 42.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C, Injection Molded) | 1900 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, 23°C, Injection Molded) | 23.0 | MPa | ISO 527-2/50 |
| Tensile Strain | ISO 527-2/50 | ||
| Yield, 23°C, injection molding | 5.0 | % | ISO 527-2/50 |
| Fracture, 23°C, injection molding | 50 | % | ISO 527-2/50 |
| Flexural Modulus 1(23°C, Injection Molded) | 2050 | MPa | ISO 178 |
| Flexural Stress (23°C, Injection Molded) | 32.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C, injection molding | 2.5 | kJ/m² | ISO 179/1eA |
| -20°C, injection molding | 3.5 | kJ/m² | ISO 179/1eA |
| 23°C, injection molding | 24 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C, injection molding | 76 | kJ/m² | ISO 179/1eU |
| 23°C, injection molding | No Break | ISO 179/1eU | |
| Notched Izod Impact | ISO 180/1A | ||
| -20°C, injection molding | 3.3 | kJ/m² | ISO 180/1A |
| 23°C, injection molding | No Break | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 97.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 53.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 130 | °C | ISO 306/A50 |
| -- | 52.0 | °C | ISO 306/B50 |
| CLTE - Flow (-30 to 80°C) | 5.5E-5 | cm/cm/°C | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Hopper Temperature | 40.0 - 80.0 | °C | |
| Processing (Melt) Temp | 220 - 260 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Holding Pressure | 30.0 - 60.0 | MPa |
| Injection instructions |
|---|
| Back pressure: Low to mediumScrew speed: Low to mediumFlow front speed: 100 - 200 mm/s |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide RF00ASXS | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| GLAMIDE® T-661 | TOYOBO America, Inc. | Nylon 66 | GLAMIDE® |
| Escorene™ Ultra UL 00226CC | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| Sumikon® RX-6551S | SBHPP | Phenolic | Sumikon® |
| Sylvin 8474-80 Black | Sylvin Technologies Incorporated | PVC+NBR | Sylvin |
