Order Products : sales@su-jiao.com
Alpha PVC GW 2403-1-VW1 NAT LCF
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XWRCga_Alpha-PVC-GW-2403-1-VW1-NAT-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A HIGH QUALITY, LEAD FREE, LOW TEMPERATURE, 90C DEGREE JACKETING COMPOUND. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.34 - 1.40 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 91 - 97 | ASTM D2240 | |
| Shaw A, 15 seconds | 82 - 88 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.762 mm | 17.9 | MPa | ASTM D412 |
| 1.91 mm | 16.5 | MPa | ASTM D412 |
| Tensile Elongation | ASTM D412 | ||
| Fracture, 1.91mm | 340 | % | ASTM D412 |
| Fracture, 0.762mm | 320 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -31.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 6.0E+11 | ohms·cm | ASTM D257 |
| Dielectric Constant (23°C, 100 MHz) | 3.20 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.029 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 28 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 149 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 166 | °C | |
| Cylinder Zone 4 Temp. | 171 | °C | |
| Cylinder Zone 5 Temp. | 171 | °C | |
| Adapter Temperature | 171 | °C | |
| Melt Temperature | 168 - 174 | °C | |
| Die Temperature | 171 | °C |
| Extrusion instructions |
|---|
| Screw Design: Standard PVC metering screw 3.0:1 compressionBarrier mixing screwMaddock mixing screw |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vydyne® 49 | Ascend Performance Materials Operations LLC | Nylon 66 | Vydyne® |
| Unilex™ UP.2000.952 | United Polychem | HDPE | Unilex™ |
| GAPEX® HT RNP38MU06NA | Ferro Corporation | Nylon+PP | GAPEX® HT |
| Ingeo™ 2500HP | NatureWorks® LLC | PLA | Ingeo™ |
| PENTAMID B GV15 MK25 H schwarz | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
