Order Products : sales@su-jiao.com
Westlake LDPE EM800AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XTsKpF_Westlake-LDPE-EM800AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WESTLAKE low-density polyethylene EM800 is a general-purpose low-density formulation used for injection molding applications that require good stress-crack resistance. EM800AA = 800A == 800E EM800CA = E6838 - 862A |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.7 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 12.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 500 | % | ASTM D638 |
| Flexural Modulus | 200 | MPa | ASTM D790 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 149 to 166 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ MDPE 8818C | The Dow Chemical Company | MDPE | DOW™ MDPE |
| Nylfor® A2 GF/30 H2 W BLACK | SO.F.TER. SPA | Nylon 66 | Nylfor® |
| 4MID® 9B22130 I3 | 4Plas | Nylon 6 | 4MID® |
| Adiprene® LFP 850A | Chemtura | PUR-Ether/PPDI | Adiprene® |
| Plenco 03557 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
