Order Products : sales@su-jiao.com
Zenite® SEA20N
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Celanese Corporation |
| Trademark: | Zenite® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XPxhZh_ZeniteSEA20N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ZENITE® SEA20N is a 40% mineral filled grade. It offers excellent surface appearance, low warpage, and excellent dimensional stability. Application for this grade is compact camera module, and other thin, small electronic parts |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.77 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Transverse flow | 0.76 | % | ISO 294-4 |
| Flow | 0.25 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 10000 | MPa | ISO 527-2/1A/1 |
| Tensile Stress (Break) | 105 | MPa | ISO 527-2/1A/5 |
| Tensile Strain (Break) | 4.2 | % | ISO 527-2/1A/5 |
| Flexural Modulus (23°C) | 10000 | MPa | ISO 178 |
| Flexural Stress (23°C) | 126 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 4.5 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 220 | °C | ISO 75-2/A |
| Melting Temperature 1 | 330 | °C | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 150 | °C | |
| Drying Time | 6.0 | hr | |
| Rear Temperature | 310 - 320 | °C | |
| Middle Temperature | 320 - 330 | °C | |
| Front Temperature | 330 - 350 | °C | |
| Nozzle Temperature | 330 - 340 | °C | |
| Processing (Melt) Temp | 335 - 345 | °C | |
| Mold Temperature | 80 - 140 | °C | |
| Injection Pressure | 50.0 - 150 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 50.0 - 150 | MPa |
| Injection instructions |
|---|
| Zone 4 Temperature: 330 to 350°C |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ming Dih EPS LS | Ming Dih Group Corporation | PS (EPS) | Ming Dih EPS |
| Cellophane™ OptiTwist™ | Innovia Films Ltd. | Cellulose, Regenerated | Cellophane™ |
| Hostalen ACP 6541A UV | LyondellBasell Industries | HDPE | Hostalen |
| KumhoSunny ABS ER872 | Shanghai KumhoSunny Plastics Co., Ltd. | ABS | KumhoSunny ABS |
| Plaslube® PA6/6 GF27 SL2 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
