Order Products : sales@su-jiao.com
Andur 2-90 AP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XOnyZk_Andur-2-90-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 2-90AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 90 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by curing Andur 2-90AP with polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 1400 | cP | ASTM D2393 |
| 100°C | 400 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 4 to 4.4%Specific Gravity, ASTM D792, 70°F: 1.06 g/mlSpecific Gravity, ASTM D792, 212°F: 1.025 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2765 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| RTP 800 SI 5 | RTP Company | Acetal (POM) Copolymer | RTP |
| Siloxane Masterbatch MB50-320 | Multibase, A Dow Corning Company | Siloxane, UHMW | Siloxane Masterbatch |
| Flontech® FT-910-ST | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Laramid G/15 | LATI S.p.A. | PPA | Laramid |
