Order Products : sales@su-jiao.com
LUBEMID A26 MB NATURAL
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | LUBEN PLAST srl |
| Trademark: | LUBEMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XOdKvO_LUBEMID-A26-MB-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Compound based on PA66 first choice. Self lubricated. With Molibdenum disulphide |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.12 to 1.16 | g/cm³ | ISO 1183/A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2500 to 3000 | MPa | ISO 527-2/1A/1 |
| Tensile Stress | ISO 527-2/1A/50 | ||
| Yield | 60.0 to 65.0 | MPa | |
| Break | 60.0 to 65.0 | MPa | |
| Tensile Strain | ISO 527-2/1A/50 | ||
| Yield | 4.0 to 6.0 | % | |
| Break | 4.0 to 6.0 | % | |
| Flexural Modulus 1 | 1800 to 2300 | MPa | ISO 178 |
| Flexural Stress 2 | 55.0 to 65.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 2.0 to 3.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 35 to 45 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact | |||
| 23°C, 3.20 mm | 25 to 35 | J/m | ASTM D256A |
| 23°C 3 | 70 to 80 | kJ/m² | ASTM D256 |
| 23°C | 2.0 to 3.0 | kJ/m² | ISO 180/A |
| 23°C 4 | 2.5 to 3.5 | kJ/m² | ASTM D256 |
| Unnotched Izod Impact Strength (23°C) | 45 to 55 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 3.20 mm | 215 to 225 | °C | ASTM D648 |
| 0.45 MPa, Unannealed | 220 to 230 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed, 3.20 mm | 70.0 to 80.0 | °C | ASTM D648 |
| Vicat Softening Temperature | |||
| -- | 240 to 250 | °C | ISO 306/A120 |
| -- | 230 to 240 | °C | ISO 306/B120 |
| Melting Temperature | 250 to 265 | °C | Internal Method |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.20 mm) | V-2 | UL 94 |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| 3 . | Notch E |
| 4 . | Notch A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VICTREX® PEEK 450FE20 | Victrex plc | PEEK | VICTREX® PEEK |
| Wanthane® WHT-8190 | Wanhua Chemical Group Co., Ltd. | TPU-Polyether | Wanthane® |
| NuSil CV-2964 | NuSil Technology | Silicone | NuSil |
| Iupiace® AH40 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
| Ultramid® Structure B3WG10 LFX BK23215 | BASF Corporation | Nylon 6 | Ultramid® |
