Order Products : sales@su-jiao.com

Eltex® MED PH27D630

Category:	LDPE , Low Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex® MED
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	XIDkcO_Eltex-MED-PH27D630.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Low Density Polyethylene for Pharmaceutical Blow Moulding Benefits & Features Eltex® MED PH27D630 is a LD-polyethylene produced in a high-pressure process intended for blow moulding of soft and flexible packages for pharmaceutical products. Eltex® MED PH27D630 is produced according to good manufacturing practice and is additive-free. Eltex® MED PH27D630 is available in granular form. Applications Eltex® MED PH27D630 can be used in “blow-fill and seal” machines for the production ampoules and bottles. The product can also be used for pharmaceutical products manufactured with other conversion techniques such as injection moulding and film blowing. Eltex® MED PH27D630 will withstand heating up to 110°C and therefore units made from this product may be steam treated to max. 110°C.

Message

Low Density Polyethylene for Pharmaceutical Blow Moulding

Benefits & Features
Eltex® MED PH27D630 is a LD-polyethylene produced in a high-pressure process intended for blow moulding of soft and flexible packages for pharmaceutical products.
Eltex® MED PH27D630 is produced according to good manufacturing practice and is additive-free.
Eltex® MED PH27D630 is available in granular form.

Applications
Eltex® MED PH27D630 can be used in “blow-fill and seal” machines for the production ampoules and bottles. The product can also be used for pharmaceutical products manufactured with other conversion techniques such as injection moulding and film blowing.
Eltex® MED PH27D630 will withstand heating up to 110°C and therefore units made from this product may be steam treated to max. 110°C.

General Information
Features	Additive Free Good Flexibility Low Density Soft Steam Sterilizable
Uses	Bottles Pharmaceutical Packaging
Agency Ratings	EP Monograph 3.1.4 USP 29 USP Class VI
RoHS Compliance	Contact Manufacturer
Forms	Granules
Processing Method	Blow Molding Blown Film Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.927	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.30	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	52		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	350	MPa	ISO 527-2/1
Tensile Stress (Yield)	12.0	MPa	ISO 527-2/50
Tensile Strain (Break)	350	%	ISO 527-2/50

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	51.0	°C	ISO 75-2/B

Extrusion	Nominal Value	Unit
Melt Temperature	165 to 200	°C

Resin Grade	Manufacturer	Category	Trademark
RTP 200 GB 10 TFE 10	RTP Company	Nylon 66	RTP
Keliren® CM401	Hangzhou Keli Chemical Co., Ltd.	CPE	Keliren®
LNP™ THERMOCOMP™ PF008QS compound	SABIC Innovative Plastics	Nylon 6	LNP™ THERMOCOMP™
Kepital® MX25BT01	KEP Americas	Acetal (POM) Copolymer	Kepital®
Bergadur™ PB40 G10 Natural	PolyOne Corporation	PBT	Bergadur™