Order Products : sales@su-jiao.com
RTP 4005 UP
| Category: | PPA , Polyphthalamide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XGglzu_RTP-4005-UP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
"Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade." |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.44 | g/cm³ | ISO 1183 |
| Moisture Content | 0.050 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 30 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 12500 | MPa | ISO 527-2 |
| Tensile Stress | 210 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 2.5 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 11000 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 310 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact Strength 1(Injection Molded) | 75 | kJ/m² | ISO 180/1U |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Data listed is for natural or black colored materials. Pigments can affect properties.Desiccant Type Dryer Required. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 105 | °C | |
| Drying Time - Desiccant Dryer | 4.0 - 6.0 | hr | |
| Dew Point | -30.0 | °C | |
| Processing (Melt) Temp | 300 - 330 | °C | |
| Mold Temperature | 135 - 160 | °C | |
| Injection Pressure | 70.0 - 125 | MPa |
| Note Message | |
|---|---|
| 1 . | 4mm thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MIRASON™ 12 | Mitsui Chemicals, Inc. | LDPE | MIRASON™ |
| Shandong Nylon A4TR04 | Shandong Dongchen Engineering Plastics Co., Ltd. | Nylon, Unspecified | Shandong Nylon |
| TECHNYL® A 218G V33 BLACK 41N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| IROGRAN® A 92 E 4860 | Huntsman Corporation | TPU-Polyester | IROGRAN® |
| LNP™ COLORCOMP™ WX96084P-WT compound | SABIC Innovative Plastics Europe | PBT | LNP™ COLORCOMP™ |
