Order Products : sales@su-jiao.com
Thermoset Plastics 261
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XGPtO4_Thermoset-Plastics-261.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics 261 is an Epoxy; Epoxide (Epoxy) material. It is available in North America for coating. Primary attribute of Thermoset Plastics 261: Heat Resistant. Typical application of Thermoset Plastics 261: Coating Applications |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 1.44 | g/cm³ | ASTM D1895 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 32.4 | MPa | ASTM D638 |
| Flexural Strength (Yield) | 54.5 | MPa | ASTM D790 |
| Compressive Strength | 131 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 1.0 Mix Ratio by Weight: 11 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 6.0 | ||
| Demold Time | |||
| 25°C | 960 | min | |
| 121°C | 60 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime Flexible 7072 NAT | Prime PVC® | PVC, Flexible | Prime Flexible |
| Radilon® S CT300 333 NER | Radici Plastics | Nylon 6 | Radilon® |
| ALCOM® PA6 900/1 Si3 | ALBIS PLASTIC GmbH | Nylon 6 | ALCOM® PA6 |
| Complet® LCF40-PA66 MT | PlastiComp, Inc. | Nylon 66 | Complet® |
| Plenco 07591 (Transfer) | Plastics Engineering Co. | Phenolic | Plenco |
