Order Products : sales@su-jiao.com
Shuman ABS/PC 380
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Shuman Plastics, Inc. |
| Trademark: | Shuman ABS/PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XDmo8p_Shuman-ABS-PC-380.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
380 GREY OFFERS THIS COMBINATION OF PROPERTIES:
|
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 4.0 to 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 41.4 to 55.2 | MPa | ASTM D638 |
| Flexural Modulus | 2210 to 2620 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 400 to 560 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 to 110 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Processing (Melt) Temp | 238 to 277 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 to 110 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Melt Temperature | 238 to 277 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ PPR-40G Nat | PolyOne Corporation | PP Homopolymer | Maxxam™ |
| RAMLLOY A001 | Polyram Ram-On Industries | Nylon 66+PP | RAMLLOY |
| Electrafil® PA6/6 03004 GF20 | Techmer Engineered Solutions | Nylon 66 | Electrafil® |
| Hostalen CRP 100 RESIST S blue | LyondellBasell Industries | HDPE | Hostalen |
| Delene 3550 | Shanghai Lin Gen Rubber Materials Co., Ltd. | TPE | Delene |
