Order Products : sales@su-jiao.com
ENGAGE™ 8137
| Category: | TPO (POE) , Polyolefin Elastomer |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | ENGAGE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XCwwQg_ENGAGE-8137.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ENGAGE™8137 polyolefin elastomer is an ethylene-octene copolymer with low density and high melt index. This combination of properties enables ENGAGE 8137 to have excellent toughness, flexibility and simple processing, and can be used as an efficient impact modifier in polyolefins or as a component in injection molding processing. Main features:
Application field:
|
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.864 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Mooney Viscosity (ML 1+4, 121°C) | 4 | MU | ASTM D1646 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 1 second, molded | 63 | ASTM D2240 | |
| Shore D, 1 second, molded | 13 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant 1(Compression Molded) | 1.80 | MPa | ASTM D638 |
| Tensile Strength 2(Break, Compression Molded) | 2.40 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 800 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | ||
| 1% secant : Molding | 7.80 | MPa | ASTM D790 |
| 2% secant : Molding | 7.30 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 4 | 26.4 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -55.0 | °C | Internal method |
| Melting Temperature (DSC) 5 | 56.0 | °C | Internal method |
| Peak Crystallization Temperature (DSC) | 38.0 | °C | Internal method |
| Additional Information |
|---|
| 对无滑石粉产品测量的属性。 |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 510 mm/min |
| 4 . | C mould |
| 5 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 203 D | RTP Company | Nylon 612 | RTP |
| Shuman PC 910 | Shuman Plastics, Inc. | PC | Shuman PC |
| Clariant Nylon 6/6 PA-133G33 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| INEOS LLDPE LL6808AA | INEOS Olefins & Polymers Europe | LLDPE | INEOS LLDPE |
| LNP™ LUBRICOMP™ QFL36 compound | SABIC Innovative Plastics | Nylon 610 | LNP™ LUBRICOMP™ |
