Order Products : sales@su-jiao.com
DOW™ LLDPE 8335
| Category: | LLDPE , Linear Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | X8W2D3_DOW-LLDPE-8335.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW™ LLDPE 8335 is a Linear Low Density Polyethylene Resin material. It is available in Latin America. Typical application of DOW™ LLDPE 8335: Food Contact Applications |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.926 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 100% Igepal, F50) | 10.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 51 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 11.0 | MPa | |
| Break | 8.00 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 2.0 | % | |
| Break | 75 | % | |
| Flexural Modulus - 2% Secant | 393 | MPa | ASTM D790B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 123 | °C | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Styrolux® 3G46 | INEOS Styrolution Group GmbH | SBC | Styrolux® |
| TRIBOCOMP® PA6 TS13 | EPIC Polymers | Nylon 6 | TRIBOCOMP® |
| Celcon® GC25A | Celanese Corporation | Acetal (POM) Copolymer | Celcon® |
| Generic Silicone Rubber, RTV-2 | Generic | Silicone Rubber, RTV-2 | Generic |
| Hyflon® MFA® D 5510 F | Solvay Specialty Polymers | Perfluoropolymer | Hyflon® MFA® |
