Order Products : sales@su-jiao.com
Gallonprene® GP320-50
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| Trademark: | Gallonprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | X67kVL_Gallonprene-GP320-50.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Gallonprene®GP320-50 is a thermoplastic elastomer (TPE) product,. It is available in Africa and the Middle East, Latin America or Asia Pacific. Gallonprene®GP320-50 applications include electrical appliances, engineering/industrial accessories, industrial applications and handles. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 60 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 23°C) | 50 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 2.80 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 350 | % | ASTM D412 |
| Injection instructions |
|---|
| Overmolding Parameters:Rear Temperature: 225 to 245°CCenter Temperature: 235 to 255°CFront Temperature: 245 to 265°CMelt Temperature: 210 to 230°CMold Temperature: 40 to 70°CProcessing Temperature Limit: 280°CInjection Pressure: HighInjection Speed: HighBack Pressure: 20 to 50%Drying Temperature: 80°CDrying Time: 2 hr |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® C 52G3 MZ25 GREY R7035 CF | Solvay Engineering Plastics | Nylon 6 | TECHNYL® C |
| Nirion 2530/M | Soredi S.p.a. | PC | Nirion |
| 4TECH® 9A22740 HFR5 | 4Plas | Nylon 66 | 4TECH® |
| Dryflex® 602600S | ELASTO | SEBS | Dryflex® |
| ALCOM® PC 740/40 FR UV WT1182-10LB | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
