Category: | Nylon 6I/6T , Polyamide 6I/6T Copolymer |
Manufacturer: | EMS-GRIVORY |
Trademark: | Grivory® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | X4NE2G_Grivory-HT1V-4-FWA-nat.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Grivory® HT1V-4 FWA nat is a Polyamide 6I/6T Copolymer (Nylon 6I/6T) material filled with 40% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Grivory® HT1V-4 FWA nat are:
Typical applications include:
|
General Information | |
---|---|
Filler / Reinforcement |
|
Features |
|
Uses |
|
Agency Ratings |
|
RoHS Compliance |
|
Appearance |
|
Forms |
|
Processing Method |
|
Physical | Dry | Conditioned | Unit | Test Method |
---|---|---|---|---|
Density | 1.53 | -- | g/cm³ | ISO 1183 |
Molding Shrinkage | ISO 294-4 | |||
Across Flow | 0.60 | -- | % | |
Flow | 0.10 | -- | % | |
Water Absorption | ISO 62 | |||
Saturation, 23°C | 3.5 | -- | % | |
Equilibrium, 23°C, 50% RH | 1.5 | -- | % |
Hardness | Dry | Conditioned | Unit | Test Method |
---|---|---|---|---|
Ball Indentation Hardness | 310 | 300 | MPa | ISO 2039-1 |
Mechanical | Dry | Conditioned | Unit | Test Method |
---|---|---|---|---|
Tensile Modulus | 14500 | 14000 | MPa | ISO 527-2 |
Tensile Stress (Break) | 220 | 210 | MPa | ISO 527-2 |
Tensile Strain (Break) | 2.0 | 2.0 | % | ISO 527-2 |
Impact | Dry | Conditioned | Unit | Test Method |
---|---|---|---|---|
Charpy Notched Impact Strength | ISO 179/1eA | |||
-30°C | 8.0 | 8.0 | kJ/m² | |
23°C | 8.0 | 8.0 | kJ/m² | |
Charpy Unnotched Impact Strength | ISO 179/1eU | |||
-30°C | 70 | 70 | kJ/m² | |
23°C | 70 | 70 | kJ/m² |
Thermal | Dry | Conditioned | Unit | Test Method |
---|---|---|---|---|
Heat Deflection Temperature | ||||
1.8 MPa, Unannealed | 280 | -- | °C | ISO 75-2/A |
8.0 MPa, Unannealed | 175 | -- | °C | ISO 75-2/C |
Continuous Use Temperature | Internal Method | |||
-- 1 | 140 | -- | °C | |
-- 2 | 250 | -- | °C | |
Melting Temperature 3 | 325 | -- | °C | ISO 11357-3 |
CLTE | ISO 11359-2 | |||
Flow | 1.5E-5 | -- | cm/cm/°C | |
Transverse | 5.0E-5 | -- | cm/cm/°C |
Electrical | Dry | Conditioned | Unit | Test Method |
---|---|---|---|---|
Surface Resistivity | -- | 1.0E+12 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+13 | 1.0E+13 | ohms·cm | IEC 60093 |
Electric Strength | 35 | 35 | kV/mm | IEC 60243-1 |
Comparative Tracking Index | -- | 600 | V | IEC 60112 |
Flammability | Dry | Conditioned | Unit | Test Method |
---|---|---|---|---|
Flammability Classification (0.800 mm) | HB | -- | IEC 60695-11-10, -20 |
Additional Information | Dry | Conditioned | Test Method | |
---|---|---|---|---|
ISO Type | PA6T/6I, MH, 12-070, GF40 | -- | ISO 1874 |
Note Message | |
---|---|
1 . | Long Term |
2 . | Short Term |
3 . | 10°C/min |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Toughblend® PC-1400 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PC | Toughblend® |
Crystal Clear® 204 | Smooth-On, Inc | PUR, Unspecified | Crystal Clear® |
ENGAGE™ 8457 DA | The Dow Chemical Company | TPO (POE) | ENGAGE™ |
Kingfa MF-30 | Kingfa | PP, Unspecified | Kingfa |
Sylvin 7833-85 Blue 8462 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |