Order Products : sales@su-jiao.com
I. Stern 913
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | I. STERN & CO. INC. |
| Trademark: | I. Stern |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | X2RE2X_I-Stern-913.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polystyrene 913 - High Impact Polystyrene Extrusion Grade Features
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) | 2.6 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 29.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 67 | % | ASTM D638 |
| Flexural Modulus | 2140 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 42.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 190 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.35 mm) | 83.9 | °C | ASTM D648 |
| Vicat Softening Temperature | 92.2 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | HB | ||
| 3.00 mm | HB |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ PA66MG40-NC010 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| Nipol® NBR DN407 | Zeon Corporation | NBR | Nipol® NBR |
| Andur 95 AP | Anderson Development Company | PUR-Ether/TDI | Andur |
| Generic PUR-Eth,aliphat | Generic | PUR-Eth,aliphat | Generic |
| Elastron® G G101.A55.N.E | Elastron USA, Inc. | SEBS | Elastron® G |
