Order Products : sales@su-jiao.com
QAMAR FC20H
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | SPDC Ltd. |
| Trademark: | QAMAR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | X1sSIc_QAMAR-FC20H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
QAMAR FC20H is a linear low density polyethylene material,. This product is available in North America, Africa and the Middle East, Europe or Asia Pacific region. The processing method is blow molded film. The main features of QAMAR FC20H are:
The typical application fields of QAMAR FC20H are: movies |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ISO 1872-2 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 9.00 | MPa | ISO 1872-2 |
| Tensile Strain (Break) | > 430 | % | ISO 1872-2 |
| Flexural Modulus | 200 | MPa | ISO 1872-2 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 30 | µm | |
| Tensile Modulus | ISO 527-3 | ||
| MD : 30 µm | 200 | MPa | ISO 527-3 |
| TD : 30 µm | 230 | MPa | ISO 527-3 |
| Tensile Stress | ISO 527-3 | ||
| MD : Break, 30 µm | 45.0 | MPa | ISO 527-3 |
| TD : Break, 30 µm | 35.0 | MPa | ISO 527-3 |
| Tensile Elongation | ISO 527-3 | ||
| MD : Break, 30 µm | 500 | % | ISO 527-3 |
| TD : Break, 30 µm | 800 | % | ISO 527-3 |
| Dart Drop Impact (30 µm) | 110 | g | ISO 7765-1 |
| Elmendorf Tear Strength | ISO 6383-2 | ||
| MD : 30 µm | 20 | N | ISO 6383-2 |
| TD : 30 µm | 160 | N | ISO 6383-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ISO 974 |
| Vicat Softening Temperature | 102 | °C | ISO 306 |
| Melting Temperature | 122 | °C | ISO 11357-3 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (30.0 µm) | 6.0 | % | ISO 14782 |
| Extrusion instructions |
|---|
| Resin Temperature: 200°CBlow up Ratio: 2.0Extruder: 40mm, L/D=24Die Diameter: 75mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nivionplast® A R306G NATURALE | SO.F.TER. SPA | Nylon 66 | Nivionplast® A |
| Geon™ Vinyl Flexible C7500 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| HiFill FR® PA6 GF/M45 L LE BK | Techmer Engineered Solutions | Nylon 6 | HiFill FR® |
| Magnobond 3106 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| Petrotene® PP A3 T20 NTLA010 PH302 | Petropol Industry and Trade of Polymers LTDA | PP, Unspecified | Petrotene® PP |
