Order Products : sales@su-jiao.com
DAI-EL™ T-530
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | DAI-EL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | X1UllO_DAI-EL-T-530.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DAI-EL Thermoplastic T-530 is a polymer consisting of fluororesin and fluoroelastomer. T-530 can be formed like a thermoplastic with properties similar to elastomer. T-530 has a good transparency and low extractable substances. T-530 offers an excellent chemical resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.89 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 22 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 67 | Internal Method |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Coefficient of Friction | 0.60 | ||
| Taber Abrasion Resistance | |||
| 1000 Cycles, CS-17 Wheel | 2.00 | mg | |
| 1000 Cycles, H-22 Wheel | 10.0 | mg |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (Yield) | 11.0 | MPa | |
| Tensile Elongation (Break) | 650 | % | |
| Tear Strength | 27.0 | kN/m | |
| Compression Set (50°C, 24 hr) | 11 | % | |
| Rebound Resilience | 10 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Gehman Torsion Test - T50 | -9 | °C | |
| Pyrolysis Initiation Temperature | 380 | °C |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 220 | °C | |
| Specific Heat | 1260 | J/kg/°C | |
| Thermal Conductivity | 0.15 | W/m/K |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Volume Resistivity | 5.0E+13 | ohms·cm | |
| Dielectric Strength | 14 | kV/mm | |
| Dielectric Constant (1 kHz) | 6.60 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXUS PP CPP1.5NB | Nexus Resin Group, LLC. | PP Impact Copolymer | NEXUS PP |
| Desmopan® 445 | Covestro - PUR | TPU-Polyester | Desmopan® |
| DeWAL DW 216 | DeWAL Industries | PTFE | DeWAL |
| Polifil® PP HM-40 | The Plastics Group | PP, Unspecified | Polifil® PP |
| KMI PP KM-008IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
