Order Products : sales@su-jiao.com
Wanthane® WHT-1198IC
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Wanhua Chemical Group Co., Ltd. |
| Trademark: | Wanthane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | X1AmWO_WanthaneWHT1198IC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TYPE: Polyester-based grade Extrusion and injection molding grade FEATURES: Excellent mechanical properties, high abrasion resistance, wear resistance, short cycle times Applications: Wire & Cable, tubes, conveyor belt, shoes, seals, screenpacks, engineering parts, etc |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 98 | ASTM D2240 | |
| Shaw D | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| DIN Abrasion | 55.0 | mm³ | ISO 4649 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 17.0 | MPa | ASTM D412 |
| 300% strain | 32.0 | MPa | ASTM D412 |
| Tensile Strength (Break) | 44.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 380 | % | ASTM D412 |
| Tear Strength | 175 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 24 hr | 23 | % | ASTM D395 |
| 70°C, 22 hr | 60 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -23.0 | °C | ASTM D3418 |
| Vicat Softening Temperature | 120 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 110 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Suggested Max Moisture | 0.030 | % | |
| Rear Temperature | 205 | °C | |
| Middle Temperature | 210 | °C | |
| Front Temperature | 215 | °C | |
| Nozzle Temperature | 220 | °C | |
| Mold Temperature | 23 | °C | |
| Screw L/D Ratio | 25.0:1.0 to 30.0:1.0 | ||
| Screw Compression Ratio | 2.0 : 1.0 - 3.0 : 1.0 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 110 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Suggested Max Moisture | 0.030 | % | |
| Cylinder Zone 1 Temp. | 180 | °C | |
| Cylinder Zone 2 Temp. | 185 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Cylinder Zone 4 Temp. | 195 | °C | |
| Adapter Temperature | 200 | °C | |
| Die Temperature | 190 - 195 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MOSTEN EH 001 | UNIPETROL RPA | PP Homopolymer | MOSTEN |
| Fainplast PVC GK 01359/R | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| Formolene® L42022E2 | Formosa Plastics Corporation, U.S.A. | LLDPE | Formolene® |
| Hangzhou Plastic PS/EVOH/PE | Hangzhou Plastic Industry Co., Ltd. | Film, PS/EVOH/PE | Hangzhou Plastic |
| Lupox® GP2150 | LG Chem Ltd. | PBT | Lupox® |
