Order Products : sales@su-jiao.com

ATTANE™ SL 4101G

Category:	ULDPE , Ultra Low Density Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	ATTANE™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Wyw8HZ_ATTANE-SL-4101G.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

ATTANE™SL 4101G ultra-low density polyethylene resin is used for blown film processing. This application requires a combination of excellent optical properties, tear resistance, impact resistance and very good heat sealing. The product also has very good kneading resistance. ATTANE SL4101G ultra-low density polyethylene resin contains slip agent and opening agent.

Application field:

diapers, pads, scouring pads, clothing

medical packaging

non-food and detergent bags

flap lining

snack food

fresh food packaging

frozen food

liquid food

Fresh and processed foods

industrial lining

Thin thickness industrial and consumer film

various heavy-duty packaging films

Complies with:

EU, No 10/2011

U.S. FDA FCN 424

Consult the regulations for complete details.

General Information
Additive	Anti-caking agent (2750 ppm) Sliding agent (1000 ppm)
Agency Ratings	FDA 21 CFR 176.170(c), Table 2 2 FDA FCN 424 Europe No 10/2011
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity ¹	0.912	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) ²(190°C/2.16 kg)	1.0	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction			ASTM D1894
With Metal-Dynamic	0.15		ASTM D1894
With self-dynamics	0.12		ASTM D1894

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	40	µm
Tensile Modulus			ISO 527-3
MD : 40 µm	130	MPa	ISO 527-3
TD : 40 µm	154	MPa	ISO 527-3
Tensile Stress			ISO 527-3
MD : Yield, 40 µm	6.50	MPa	ISO 527-3
TD : Yield, 40 µm	6.20	MPa	ISO 527-3
MD : Break, 40 µm	32.0	MPa	ISO 527-3
TD : Break, 40 µm	30.0	MPa	ISO 527-3
Tensile Elongation			ISO 527-3
MD : Break, 40 µm	680	%	ISO 527-3
TD : Break, 40 µm	800	%	ISO 527-3
Dart Drop Impact (40 µm)	2700	g	ISO 7765-1/A
Elmendorf Tear Strength			ASTM D1922
MD : 40 µm	600	g	ASTM D1922
TD : 40 µm	800	g	ASTM D1922

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature ³	92.0	°C	ASTM D1525

Optical	Nominal Value	Unit	Test Method
Gloss (20°, 40.0 µm)	45		ASTM D2457
Haze (40.0 µm)	8.0	%	ISO 14782

Extrusion	Nominal Value	Unit
Melt Temperature	190 - 240	°C

Extrusion instructions
吹塑薄膜挤出的制造条件：模具间隙 1.6 至 2.5 mm 熔体温度：190 至 240°C 放大比：1.5 比 3.5 建议的厚度范围：10 至 80 µm

Note Message
1 .	Compression molded sample
2 .	Compression molded sample
3 .	Compression molded sample

Resin Grade	Manufacturer	Category	Trademark
RTP 284 C TFE 15	RTP Company	Nylon 11	RTP
TRIREX® Compound 3025M05	Samyang Corporation	PC	TRIREX® Compound
Ecomass® 1850ZN66T1	Ecomass Technologies	Nylon 6	Ecomass®
Laprene® 830000844	SO.F.TER. SPA	SEBS	Laprene®
Karina BLACK PVC COMP. -E 753D48/ 1-B-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Flexible	Karina