Order Products : sales@su-jiao.com
Devcon 1 Minute™ Epoxy Gel
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Devcon |
| Trademark: | Devcon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WwT6tL_Devcon-1-Minute-Epoxy-Gel.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Super-fast epoxy which bonds to metals, glass, fiberglass, and ceramics. Sets up in 30 seconds for instant adhesion Intended Use:
Product features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Volume | 0.929 | cm³/g | |
| Solid content- by Volume | 100 | % |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Impact Resistance | 9.46 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature - Dry | -40 - 93 | °C |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Work Time | 45.0 | sec |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Shear Adhesion | 11.0 | MPa | ASTM D1002 |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.13 | g/cm³ |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Elongation (Break) | 1.0 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 19 | kV/mm | ASTM D149 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 1.0 Mixing ratio by capacity: 1.0 | ||
| Component B | Mixing ratio by weight: 1.0 Mixing ratio by capacity: 1.0 | ||
| Thermoset Mix Viscosity | 70000 | cP |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Curing Time | 2.0 | hr |
| Note Message | |
|---|---|
| 1 . | Mixed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam RF0023K | Eurostar Engineering Plastics | Nylon 66/6 | Starflam |
| New-prene™ 6165B | Total Polymer Vision (Suzhou) Co., LTD | PP+EPDM | New-prene™ |
| ALTECH® ABS A 1000/710 | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
| FHR Polypropylene P4C6B-134A | Flint Hills Resources, LP | PP Homopolymer | FHR Polypropylene |
| LNP™ LUBRICOMP™ OCP36F compound | SABIC Innovative Plastics | PPS, Linear | LNP™ LUBRICOMP™ |
