Order Products : sales@su-jiao.com
MBA PS 3122 70/42
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | MBA Polymers |
| Trademark: | MBA PS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Wum5sv_MBA-PS-3122-70-42.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A post-consumer recycled polystyrene for general use. Available in traffic grey A (reference 70/42). |
| General Information | |
|---|---|
| Recycled Content |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | Internal Method |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 6.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2200 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, 23°C) | 23.0 | MPa | ISO 527-2/50 |
| Flexural Modulus (23°C) | 2150 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 7.0 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact Strength (23°C) | 7.5 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 89.0 | °C | ISO 306/B50 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Suggested Max Moisture | 0.050 to 0.10 | % | |
| Processing (Melt) Temp | 190 to 230 | °C | |
| Mold Temperature | 20.0 to 60.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Suggested Max Moisture | 0.050 to 0.10 | % | |
| Melt Temperature | 180 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Retpol® 300 GF HS | PolyPacific Pty. Ltd. | PP Homopolymer | Retpol® |
| Anjaflam® 350-FRO/GF30 | Almaak International GmbH | Nylon 66 | Anjaflam® |
| LNP™ THERMOCOMP™ LX09409 compound | SABIC Innovative Plastics | PEEK | LNP™ THERMOCOMP™ |
| Lustran® SAN CN88 | Styrolution | SAN | Lustran® SAN |
| Dryflex® SE 80A301N U | ELASTO | SEBS | Dryflex® |
