Order Products : sales@su-jiao.com
CarmelStat™ CS 5115
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Carmel Olefins Ltd. |
| Trademark: | CarmelStat™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WuDTEr_CarmelStat-CS-5115.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastomer modified PP for boxes, containers and pallets. CS 5115 is the clean room compatible version of CS 1115. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 6.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.10 | % | ASTM D955 |
| Water Absorption (Equilibrium) | 0.060 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 22.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 1900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 100 | J/m | ASTM D256 |
| Unnotched Izod Impact | 230 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 150 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+9 | ohms | ASTM D4496 |
| Volume Resistivity | 1.0E+9 | ohms·cm | ASTM D257 |
| Additional Information |
|---|
| Volume Resistivity, ASTM D257: 1e6 to 1e9 ohm-cmSurface Resistivity, SEOS/ESD 11.11: 1e6 to 1e9 ohmsImpact Resistance, ASTM D5628: 11J |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARCOBLEND MBD1000 NC01 | POLY GIN | PC+ABS | MARCOBLEND |
| Zetpol® 2030H | Zeon Corporation | NBR | Zetpol® |
| Nanjing Hongrui PA6 B306 | Nanjing Hongrui Engineering Plastics Co., Ltd. | Nylon 6 | Nanjing Hongrui PA6 |
| ELASTOSIL® LR 3005/70 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| ESENTTIA 25C35-EC | Polipropileno del Caribe S.A. | PP Impact Copolymer | ESENTTIA |
