Order Products : sales@su-jiao.com
SABIC® LDPE 2201S4
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WtXgF1_SABIC-LDPE-2201S4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LDPE 2201S4 is a grade with a high amount of anti block and a low amount of slip agent (E=erucamide). The grade contains anti oxidant. The grade shows good optical properties. Application SABIC® LDPE 2201S4 is typically used for applications where stabilisation is required during extrusion, storage and usage. Films from this grade show low reblocking values. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.85 | g/10 min | ISO 1133 |
| Films | Nominal Value | Unit | |
|---|---|---|---|
| Film Thickness - Tested | 50 | µm |
| Additional Information |
|---|
| Film properties have been measured at film of 50 µm with a BUR = 3.The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRE-ELEC® TPE 1504 | Premix Oy | TPE | PRE-ELEC® |
| RAMAPET® N1S | Indorama Ventures PCL | PET | RAMAPET® |
| Axiall PVC 8670 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| DuraGrip® DGR 6040NCEHT | Advanced Polymer Alloys | TPE | DuraGrip® |
| LNP™ THERMOCOMP™ D551 compound | SABIC Innovative Plastics Asia Pacific | PC | LNP™ THERMOCOMP™ |
