Order Products : sales@su-jiao.com
RELENE® 52GB010
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WsXhTz_RELENE-52GB010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| G2GB010 is a High Density Polyethylene (HDPE) blow moulding grade. It possesses good die swell, weld line strength, impact strength and broad molecular weight distribution for easy processability. 52GB010 can readily be processed on most of the HDPE blow moulding lines. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 28.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 12 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® A 218 MZ15 V25 BLACK 31 N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Anjaconduct® 350-KF1E3 | Almaak International GmbH | Nylon 66 | Anjaconduct® |
| KRALASTIC® AN-491 R-1 | Nippon A&L Inc. | ABS | KRALASTIC® |
| PETILEN YY B 0153 | PETKIM Petrokimya Holding A.S. | HDPE | PETILEN |
| ALPERFORM PC LD | ALBIS PLASTIC GmbH | PC | ALPERFORM |
