Order Products : sales@su-jiao.com
LEMALLOY® BX505
| Category: | PPE+Nylon 6 , Polyphenylene Ether + Nylon 6 |
| Manufacturer: | Mitsubishi Engineering-Plastics Corp |
| Trademark: | LEMALLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WrxDBy_LEMALLOY-BX505.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LEMALLOY® BX505 is a Polyphenylene Ether + Nylon 6 (PPE+Nylon 6) material. It is available in Asia Pacific, Europe, or North America for injection molding. |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.09 | -- | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (280°C/5.0 kg) | 19.0 | -- | cm³/10min | ISO 1133 |
| Molding Shrinkage | ||||
| Across Flow : 3.20 mm | 1.1 to 1.3 | -- | % | |
| Flow : 3.20 mm | 1.2 to 1.4 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 2200 | 1200 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 54.0 | 38.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, 23°C) | 4.2 | 19 | % | ISO 527-2 |
| Nominal Tensile Strain at Break (23°C) | 41 | 120 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 2200 | 1200 | MPa | ISO 178 |
| Flexural Stress (23°C) | 85.0 | 47.0 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 35 | 88 | kJ/m² | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 155 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 70.0 | -- | °C | ISO 75-2/A |
| CLTE - Flow | 9.0E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 110 to 120 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 240 to 270 | °C | |
| Middle Temperature | 250 to 290 | °C | |
| Front Temperature | 250 to 290 | °C | |
| Nozzle Temperature | 250 to 290 | °C | |
| Mold Temperature | 60.0 to 100 | °C | |
| Injection Pressure | 20.0 to 150 | MPa | |
| Injection Rate | Moderate | ||
| Screw Speed | 60 to 150 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 207 HS | RTP Company | Nylon 66 | RTP |
| Shandong PA6 FRPA6 | Shandong Dongchen Engineering Plastics Co., Ltd. | Nylon 6 | Shandong PA6 |
| Solprene® 1322 | Dynasol Elastomers | SBR, Solution | Solprene® |
| Gallonprene® GP410-5503 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| LNP™ LUBRICOMP™ WAL34 compound | SABIC Innovative Plastics | PBT | LNP™ LUBRICOMP™ |
