Order Products : sales@su-jiao.com
Ebalta SG 600 / PUR 4
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Ebalta Kunststoff GmbH |
| Trademark: | Ebalta |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WoGr2L_Ebalta-SG-600-PUR-4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SG 600 is a very thin liquid two-component Polyurethane casting resin, which cures very fast at room temperature. The fine structure and the very good flow properties, make it possible to produce exact castings with high mechanical and thermal properties. SG 600 cures very fast at room temperature, so that the produced castings can be demoulded after 30 minutes. SG 600 can be easily processed and is very well mechanically workable, so that the material can be used versatile. Material should be carefully stirred up/ shaked before use. Applications
Properties
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Shore Hardness (Shore D) | 82 to 88 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 4900 to 5900 | MPa | ISO 178 |
| Flexural Stress | 35.0 to 45.0 | MPa | ISO 178 |
| Compressive Stress | 62.0 to 78.0 | MPa | ISO 604 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 2.4 to 2.8 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Martens Temperature | 69 to 73 | °C | DIN 53458 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 15 | ||
| Resin | Mix Ratio by Weight: 100 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (20°C) | 1.55 to 1.65 | g/cm³ | |
| Viscosity (25°C) | 0.90 to 1.3 | Pa·s | |
| Curing Time (20°C) | 1.0 to 2.0 | hr | |
| Pot Life 1(20°C) | 4.0 to 6.0 | min |
| Note Message | |
|---|---|
| 1 . | 200 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Alathon® ETP H4262 | LyondellBasell Industries | HDPE | Alathon® ETP |
| BP RPP 3015 T NAT | Buckeye Polymers, Inc. | PP, Unspecified | BP |
| GATONE™ 5330CF | Solvay Specialities India Private Limited (SSIPL) | PEEK | GATONE™ |
| Geon™ Fiberloc™ 81510 | PolyOne Corporation | PVC, Rigid | Geon™ Fiberloc™ |
| TechnoFin PP T 10 | TechnoCompound GmbH | PP, Unspecified | TechnoFin |
