Order Products : sales@su-jiao.com
RTP 1305 HF
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WoAadf_RTP-1305-HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.53 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 11700 | MPa | ASTM D638 |
| Tensile Strength | 124 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 1.3 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 11000 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 172 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 80 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 320 | J/m | ASTM D4812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 288 to 321 | °C | |
| Middle Temperature | 288 to 321 | °C | |
| Front Temperature | 288 to 321 | °C | |
| Mold Temperature | 135 to 177 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA1010 PA1010 | Shandong Dongchen Engineering Plastics Co., Ltd. | Nylon 1010 | Shandong PA1010 |
| SLOVAMID® 66 GF 14 HI TS | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Fainplast PVC GSO 70/33 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| Garaflex™ O 9940 DWN-R NATURAL | AlphaGary | TPE | Garaflex™ O |
| INNOPOL® PP CS 2-2110 | Inno-Comp Ltd. | PP Copolymer | INNOPOL® PP |
